Codefree DVD - Unabhängig vom Regionalcode!

deutschDa hat man nun einen neuen DVD Player mit allen Schikanen gekauft, jedoch haben die amerikanischen DVDs einen anderen Regionalcode als die europäischen und der DVD-Player meldet ein "NO PLAY", wenn man versucht sie abzuspielen. Mit unseren eleganten Umbauten und nur minimalem Hardwareaufwand ist das alles kein Hindernis mehr.

Mit der Fernbedienung wird im standby-Zustand einfach die Taste "1" für Regionalcode 1 oder die Taste "2" für Regionalcode 2 gedrückt, mit der "Power"-Taste eingeschaltet und schon spielt der DVD Player die gewünschte DVD!

Je nach Modell eröffnen sich noch weitere Möglichkeiten, wie z.B. die automatische Regionalcode-Erkennung oder die Möglichkeit, die U.S. DVD wahlweise in echtem NTSC oder Pseudo-PAL (für ältere Fernsehgeräte) wiederzugeben.

Alle Einstellungen im Setup-Menü lassen sich auch weiterhin abspeichern! Ebenso merkt sich der Player die letzte Einstellung des Regionalcodes. Bei anderen bekannten Umbauten kann der Player nach dem Ausschalten schon mal alles "vergessen"...

extension circuit
Erweiterung im Panasonic DVD-Player


Zur Zeit werden von uns folgende Modelle umgebaut:

Fabrikat Modell Regionalcodes Video Norm Region 1  
Denon DVD2000 1, 2 NTSC 3.58  
DVD2500 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
Panasonic DVD-A100 1, 2 NTSC 3.58  
DVD-A150 (<1998) 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
DVD-A150 (neue Modelle) 1, 2 NTSC 3.58, PAL 60Hz  
DVD-A350 (<1998) 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
DVD-A350 (neue Modelle) 1, 2 NTSC 3.58, PAL 60Hz  
DVD-A360 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
DVD-RV20 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
DVD-RV40 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
DVD-RV60 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
Pioneer DV-505 1, 2, 3, 4, 5, 6 NTSC 3.58  
DVL-909 1, 2, 3, 4, 5, 6 NTSC 3.58  
Sony DVP-S315 1, 2 NTSC 3.58  
DVP-S715 1, 2 NTSC 3.58  
DVP-NS300 auto NTSC 3.58  
DVP-NS305 auto NTSC 3.58  
DVP-NS310 auto NTSC 3.58  
DVP-NS400 auto NTSC 3.58  
DVP-NS405 auto NTSC 3.58  
DVP-NS410 auto NTSC 3.58  
DVP-NS700 auto NTSC 3.58  
DVP-NS705 auto NTSC 3.58  
DVP-NS900 auto NTSC 3.58  
DVP-NS905 auto NTSC 3.58  
Thomson DTH1000 1, 2 NTSC 3.58  
DTH2500 1, 2 NTSC 3.58, PAL 60Hz  
DTH3600 1, 2, auto PAL 60Hz  
DTH4200 1, 2, auto NTSC 3.58, PAL 60Hz  
Toshiba SD3107 1, 2, auto NTSC 3.58, PAL 60Hz  
Yamaha DVD1000 1, 2 NTSC 3.58  



Umgeschaltet wird fast immer im Standby mit der normalen DVD Fernbedienung
durch einfaches Drücken der dem Regionalcode entsprechenden Ziffer,
nicht wie bei anderen Umbauten mit den Bedientasten auf der Frontseite des Gerätes.
Nur bei den "auto" Geräten muss gar keine Taste gedrückt werden.



Bedienung Panasonic A150/A350/A360/RV20/RV40/RV60, Denon 2500:
(Bedienung im Standby)
IR Taste Aktion
0 auto region (nicht "region 0"!) (A350: nur Modelle <1998)
1 Region 1 PAL 60Hz
2...6 Region 2...6
7 Region 1 NTSC 3.58
Ab A360 nur Taste 0..6, PAL/NTSC im Setup


Bedienung Sony S315/S715:
(Bedienung im Standby)
IR Taste Aktion
1 Region 1 NTSC 60Hz
2 Region 2
Bei der Umschaltung des Regionalcodes leuchtet die rote standby-LED zur Bestätigung kurz grün auf.


Bedienung Pioneer DVL-909:
(Bedienung im eingeschalteten Zustand, ohne Medium im Laufwerk)
IR Taste Aktion
MENU OSD: Setup
1 initial menu
DISPLAY augenblicklicher Regionalcode und Version erscheint
CONDITION + [1..6] um Regionalcode zu ändern
MENU neuer Regionalcode wird gespeichert


Anleitungen zum Selbsteinbau:

Screenshot: Incompatible Region CodeDie "auto" Region Einstellung bei Panasonic funktioniert z.B. nicht mehr mit den neuesten Titeln von Buena Vista (Armageddon, The Crow), siehe den originalen Screenshot. Dann muß man direkt auf Regionalcode 1 schalten - und schon laufen auch diese Titel. Interessanterweise laufen diese Titel beim Panasonic A350 danach auch in der "auto" Einstellung, was wohl damit zusammenhängt, daß der Player sich die 10 (?) zuletzt gespielten DVDs merkt und diese Abfrage noch vor dem Regionalcode kommt.


Codefree DVD - Region Code independent!

EnglishYou are the proud owner of a new DVD Player with all features, but you can only use DVDs from the region where you bought it. If you try to watch the "wrong" DVD, the player shows "NO PLAY", tells you on screen something about a wrong region and stops.

But there will be no problem if you use our elegant reconstruction with a minimum of hardware. Press the key of the corresponding region code on your remote control while you are in standby and after power-on, the DVD Player plays the desired DVD!

Depending on the model you will get additional features like an auto-region-detect or playing U.S. DVDs in NTSC or Pseudo-PAL (for older european TV sets).

All your setups will be stored as before the reconstruction! Even your last region code choice. Other known solutions may "forget" everything after power-off...

connection in
        the DVD player
Extension board is connected
to the Panasonic DVD-Player


Until now we modify the following models:

Brand Model Region Codes Video norm Region 1  
Denon DVD2000 1, 2 NTSC 3.58  
DVD2500 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
Panasonic DVD-A100 1, 2 NTSC 3.58  
DVD-A150 (<1998) 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
DVD-A150 (new models) 1, 2 NTSC 3.58, PAL 60Hz  
DVD-A350 (<1998) 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
DVD-A350 (new models) 1, 2 NTSC 3.58, PAL 60Hz  
DVD-A360 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
DVD-RV20 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
DVD-RV40 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
DVD-RV60 1, 2, 3, 4, 5, 6, auto NTSC 3.58, PAL 60Hz  
Pioneer DV-505 1, 2, 3, 4, 5, 6 NTSC 3.58  
DVL-909 1, 2, 3, 4, 5, 6 NTSC 3.58  
Sony DVP-S315 1, 2 NTSC 3.58  
DVP-S715 1, 2 NTSC 3.58  
DVP-NS300 auto NTSC 3.58  
DVP-NS305 auto NTSC 3.58  
DVP-NS310 auto NTSC 3.58  
DVP-NS400 auto NTSC 3.58  
DVP-NS405 auto NTSC 3.58  
DVP-NS410 auto NTSC 3.58  
DVP-NS700 auto NTSC 3.58  
DVP-NS705 auto NTSC 3.58  
DVP-NS900 auto NTSC 3.58  
DVP-NS905 auto NTSC 3.58  
Thomson DTH1000 1, 2 NTSC 3.58  
DTH2500 1, 2 NTSC 3.58, PAL 60Hz  
DTH3600 1, 2, auto PAL 60Hz  
DTH4200 1, 2, auto NTSC 3.58, PAL 60Hz  
Toshiba SD3107 1, 2, auto NTSC 3.58, PAL 60Hz  
Yamaha DVD1000 1, 2 NTSC 3.58  



Region is almost always selected in standby with the normal DVD remote control
by pressing the corresponding number to the region code,
not like other reconstructions by using the front panel keys.
There is no need to press any key at the "auto" devices.



Controling Panasonic A150/A350/A360/RV20/RV40/RV60, Denon 2500:
(operation in standby)
IR key action
0 auto region (not "region 0"!) (A350: only models <1998)
1 region 1 PAL 60Hz
2...6 region 2...6
7 region 1 NTSC 3.58
Since A360 only key 0..6, PAL/NTSC in setup


Controling Sony S315/S715:
(operation in standby)
IR key action
1 region 1 NTSC 60Hz
2 region 2
Region switching is confirmed by green flashing with the red standby LED.


Controling Pioneer DVL-909:
(operation in power-on mode without any medium in drive)
IR key action
MENU OSD: Setup
1 initial menu
DISPLAY current region code is displayed
CONDITION + [1..6] to select Region code
MENU new region code will be saved


screen shot: incompatible Region CodeThe region selection "auto" on Panasonic devices will suck with the latest titles from Buena Vista (Armageddon, The Crow), look at the original screen shot. Then you must switch direct to region 1 - and the title will be played. Most interesting, these titles will play after selecting again "auto", propably because the player saves the 10 (?) last played DVDs and the branch is before the region check.


deutschNur die oben angeführten DVD Player eignen sich für einen Umbau!
Eventuelle Garantieprobleme entstehen nicht. Bei einer notwendigen Garantiereparatur einfach das Gerät an untenstehende Adresse einschicken - wir übernehmen die Garantiereparatur. Es entstehen lediglich Handlingkosten für den Versand.

EnglishOnly the mentioned DVD players are suitable for this upgrade!
There won't be any guarantee problems. If there should be a guarantee reparation necessary, please send the player to the address below - you only have to pay for shipping.


ue-consult
Günther Holzhofer
Stuttgarter Straße 46 - 48
73430 Aalen
(GERMANY)
Fon +49-(0)7361-62623
Fax +49-(0)7361-69506
email: info@ue-consult.de


Für nähere Auskünfte per email: klicken Sie hier

Für Bestellungen per email: klicken Sie hier
? For further informations by email: click here

For orders by email: click here



[Homepage: http://www.ue-consult.de/]